|
|
| Author |
Message |
| 25 new of 47 responses total. |
lowclass
|
|
response 5 of 47:
| 
Jan 2 23:16 UTC 2001 |
If I were tackling your problem, I'd remind myself of the concrete
mount bolts you can get from a quality hardware store. you drill a hole in
the concrete, (with a hammer drill and mortar bit: rentable) and find somebody
to fabricate a mount for a wood or steel post. Unfortuneately, I know of
nobody on Grex (or M-net) with the skills, or at least neccessary tools.
I've DONE things like that, but having access to the tools at thiws
point is highly improbable.
|
ea
|
|
response 6 of 47:
|
Jan 3 00:18 UTC 2001 |
Building a mailbox out of pine? That's going to be a pretty sturdy
mailbox.
(or did resp:4 refer to the email program that is installed on many
many many UNIX systems, including Grex?)
|
polygon
|
|
response 7 of 47:
|
Jan 3 00:33 UTC 2001 |
When I first wrote #0, I started by saying "This is not a Unix problem."
Maybe I was too hasty in deleting that line.
|
keesan
|
|
response 8 of 47:
|
Jan 3 01:11 UTC 2001 |
You don't need a flag on the city style mailbox, so can't you just use the
rural style box without the flag? We have the slit-in-the-door type installed
in the door to a locked, glassed-in, unheated porch. The flag is presumably
something that people can see from the door at a distance from the mailbox,
which is on the road in rural areas where mail carriers do not walk. You put
the flag up if you want the carrier to pick up some mail. You don't need a
flag in the city.
|
rcurl
|
|
response 9 of 47:
|
Jan 3 04:57 UTC 2001 |
Two point:
1. A rural box is at the roadside and the postperson can pick up mail
and deliver mail without leaving the mailtruck. The flag is to tell
the mailperson that you have mail to go in case there is none to deliver.
2. A town box is not for putting out mail, only for receiving it, since
the mailperson would have to come to the door to collect mail even if
there is none to deliver, and that would slow things down greatly. If
you have had mail picked up from a rural box attached to a house, it
was an independent curtesy of the mailperson, and not required, and
probably only done if you were receiving mail.
If you think the mailperson at the new place would be willing to
pay any attention to the flag - add one on the other side of the
box.
|
janc
|
|
response 10 of 47:
|
Jan 3 05:34 UTC 2001 |
I've been looking for a respectable wall-mount mailbox too. Doing a web
search for "mailboxes" is a bit tricky. Most of what I found confirms Larry's
(and my) previous experience in looking for mailboxes.
http://www.mailboxsolutions.com/wallmnt.html
A number of rather nice mailboxes, ranging in price from $80 to $260.
Rather pricey for a simple box.
http://shop.toohome.com/html/cats/category_407.asp
Proves mailslots can still be bought for plausible prices. The box
here is $50 and only 5" wide.
http://www.dbcity.com/mailbox/Wallmoun.htm
At the top of this page is a plain rectangular aluminum box, only $155.
Of course, that's the bottom of the line.
http://www.floweringart.com/
Custom hand-painted mailboxes for only $50. Claims to offer wall mounts
but none pictured. Hard to tell if they are of a useful size. Might
not be bad if you like flowers.
http://www.mailboxnet.com/wall4.html
Some of the boxes here are almost borderline sane - but only relatively
speaking. The Swedish ones are only $50, 9x14x4" and perfectly sensible
except for the Swedish Post emblems.
http://www.americanmailbox.com/resentel.htm
Aside from being a bit too small, these look almost decent for $58.
http://www.gardenfantasy.com/cat/Products/mainhtml/mailboxes.htm
$57 for a pretty painted wooden box of a reasonable size.
OK, Netscape croaked (got into a mode where it loads pages (you can see the
HTML with "View Source") but can't be bothered to display them - just gives
a blank screen - fah!). But I think Tim had the right idea: pine. Get
some hunks of wood and a few inches of piano hinge, and it should be easy
to build a decent mailbox for a few bucks. Wish I had time.
|
janc
|
|
response 11 of 47:
|
Jan 3 05:37 UTC 2001 |
Rane slipped in. We always get mail. If we didn't Tom would probably knock
on the door to tell us we weren't getting mail today, because he knows how
much Valerie would miss getting mail. He's always happy to pick up mail from
us, but I do think that is a courtesy. He seems to do several nice things
not required by postal service policy.
|
polygon
|
|
response 12 of 47:
|
Jan 3 06:01 UTC 2001 |
Mail carriers routinely pick up outgoing mail from city delivery points.
It *is* part of their function.
I am not especially concerned about this. Given a choice, I'd rather take
the outgoing mail to the post office myself. However, Janice feels
differently about this, and routinely leaves outgoing mail for the mail
carrier to pick up.
I don't really care if the mailbox has a flag or not. The problem with
the flag on the standard rural mailbox is that the flag mechanism tends to
be welded on, and the presence of the flag makes it awkward to mount the
box against the wall.
|
mdw
|
|
response 13 of 47:
|
Jan 3 06:18 UTC 2001 |
So put some spacers in and mount the mailbox a few inches away from the
wall. You probably ought to do this anyways to give rain & snow a place
to go.
|
polygon
|
|
response 14 of 47:
|
Jan 3 06:28 UTC 2001 |
Hmmm, consulting a copy of the Domestic Mail Manual (a 1987 edition,
admittedly), it appears that Rane is right and I am wrong about the
collection of mail from rural boxes.
Section 152.23: "Mail on which postage has been paid may be deposited for
collection in mailboxes on rural routes." There is no parallel section
for city delivery.
Section 156.4 provides that rural customers can leave money in their
boxes to pay for postage.
Curiously, the chapter on City Delivery does not offer the type of
walk-up-to-the-door service which our house and Jan's house both receive.
The only options for residential housing are Curbside (i.e., like a rural
route), Sidewalk (same thing but next to the public sidewalk) or Central
(a whole lot of mailboxes together in the middle of the housing
development).
I suppose those of us with old-fashioned service are all continued under
155.13, which states that "Nothing in this part shall be interpreted to
require any changes in any city delivery service which was initiated under
prior city delivery regulations."
I don't know if the DMM is on the Web yet or not. I just had this
13-year-old paper copy handy.
|
polygon
|
|
response 15 of 47:
|
Jan 3 17:23 UTC 2001 |
Re 13. Installing the mailbox far enough away from the wall that there's
room for the flag mechanism would require the creation of some kind of
complicated structure to support it.
A rural style mailbox has vertical flanges around the bottom with holes
for nails or screws to attach it. There isn't any way to attach "spacers"
to the sides, absent some kind of metal drill to puncture the steel.
|
rcurl
|
|
response 16 of 47:
|
Jan 3 17:29 UTC 2001 |
Hardly "complicated". Two pieces of wood longer than the height of the box
can be screwed to the box, and then to the wall. Making a hole in metal
with a drill is a common operation and is not difficult.
|
polygon
|
|
response 17 of 47:
|
Jan 3 18:02 UTC 2001 |
Maybe a common operation if you have professional tools.
|
gull
|
|
response 18 of 47:
|
Jan 3 21:11 UTC 2001 |
Interesting that mail pick-up in the city is not required. I assume this is
because it's presumably a short drive to the nearest drop box. My parents'
has always been picked up from their house anyway, but I did notice this
summer that postal workers won't pick up outgoing mail from apartment
central mailboxes. My parents live in town but have a "rural-style" mailbox
on a post set next to the porch.
|
krj
|
|
response 19 of 47:
|
Jan 3 22:01 UTC 2001 |
Larry, you should look at our mailbox, which I would describe as
"a trough with a cover." It's roughly the same volume as a "rural"
mailbox, but it has a hinged lid on the top instead of the side.
Magazines, oodles of catalogs and small mail order packages go into
it just fine.
Of course I have no idea where it came from; I'm pretty sure it was
in place when we moved in.
|
mdw
|
|
response 20 of 47:
|
Jan 3 22:12 UTC 2001 |
There's nothing hard about drilling holes in ordinary sheet metal.
Decide where you want the hole. Mark the spot. Put a dent there with a
hammer & nail. Place a piece of scrap lumber behind the hole, and drill
through. The dent is to keep the bit from "wandering" before it digs
in. The scrap lumber is to make sure metal filings don't curl around
and uglify the exit side of the hole. You can skip both if you aren't
concerned about appearance, neatness or accuracy.
If you don't want to make holes in the side of the box, you could also
rig up a fairly simple "shelf" for the box to sit on. All you'd need
for that are your vertical bits of wood (to attach to the house), some
triangular shaped blocks (to go from vertical to horizontal), and a
sheet of plywood, approximately the size of the mailbox. Flathead
screws can be used to attach the triangular blocks to the shelf & its
supports -- and you'll need to drill a pilot hole approximately the
diameter of the inside of the screw threads where you want the screws to
go. Then it's just muscle power (or a power screw driver) to put it all
together, and some paint to protect it from the elements. The
triangular bits can be made simply by sawing through regular lumber at
an angle.
|
keesan
|
|
response 21 of 47:
|
Jan 3 22:36 UTC 2001 |
Is there some reason that the rural box has to be installed with the flat side
down, rather than up, or against the house? Scott, should we link this to
DIY? (I forgot how).
|
scott
|
|
response 22 of 47:
|
Jan 3 23:15 UTC 2001 |
Hm, yeah, actually I think "dwellings" would be a good conference too.
Anyway, I'll link it.
|
scg
|
|
response 23 of 47:
|
Jan 4 00:50 UTC 2001 |
My parents have a mailbox much like krj describes.
|
rcurl
|
|
response 24 of 47:
|
Jan 4 01:05 UTC 2001 |
I checked the rural mailboxes (3) in front of our house (our's, and
those of two neighbors), and all three have removable flag brackets.
They are held on with two machine screws (nuts inside), one screw
also being the pivot for the flag. So, you don't need standoffs.
I am amused by polygon calling a drill a "professional tool". K-Mart has
them.
|
gull
|
|
response 25 of 47:
|
Jan 4 02:22 UTC 2001 |
Moreover, if he owns a home he'll need one sooner or later regardless.
|
keesan
|
|
response 26 of 47:
|
Jan 4 02:52 UTC 2001 |
He is welcome to borrow one of Jim's drills, or bring over the mailbox to be
drilled. We got our mail slot cheap at Fingerle Lumber.
|
polygon
|
|
response 27 of 47:
|
Jan 4 03:15 UTC 2001 |
Re 24. I have a drill that works for wood. Drilling through concrete
or steel, I thought, was a different matter.
|
mdw
|
|
response 28 of 47:
|
Jan 4 05:37 UTC 2001 |
Sheet steel is fairly soft & thin. Ordinary drill bits should work
fine.
(If you were a professional, you'd probably have a preference
between "carbon" and "high speed steel" for this, and that
preference would give you the neater appearance and/or least
cost. You or I will probably lose the drill bit first before it
wears out, and won't ever remember how much it cost, and the
screw will cover up any bit of ugliness that even the mailman
won't see because it's dark inside there. Or if it's too ugly
for the screw to cover up or grip, a flat metal washer will save
the day.)
That ordinary drill bit won't cut as quickly as through wood, but
because it's so thin, it will still go through in very little time. If
you were drilling through something thicker, you'd probably want to
squirt oil on it (for cooling), and if it were harder, you might need a
special bit. Concrete is something else entirely, and yes, you want
different stuff there (an ordinary drill bit would probably not cut real
well, and go dull pretty fast.)
|
senna
|
|
response 29 of 47:
|
Jan 4 05:59 UTC 2001 |
I'm partial to balanced Makita and Dewalt cordlesses for normal screw-based
applications, but any drilling requires heavier equipment. My dad owns a
Craftsman corded drill that predates my birth that still has some serious
kick.
|
