|
|
The HO scale slot car racING item. Ypsi Cycle just set up a slot car track and is currently organizing a race schedule. I've found it to be an exciting and fairly inexpensive hobby. There are lots of ways to customize your cars and controllers. It's still fairly low-tech, so it is quite hackworthy. Hobbies Unlimited on Middlebelt (east side) just north of 7 Mile also has a track set up, and an active club.
7 responses total.
several years ago I was into HO slot cars. Back in the days when there was more than just Tyco. I rewound motors, built electronic PW controllers, even built some of my own cars from bits of brass and then fitted with painted clear plastic bodies. Some were very fast. Some were very slow. Either way, it was a LOT of fun!! And inexpensive. Still have the cars,as well as about 100ft of track.
There IS more than Tyco today. The Tomy "Super G" is the rage. I'm running a Tyco and a Rokar (now Life Like).
Most of my cars and all of the track was Aurora. Have a lot of the original plain cars and even some of the newer Magnatraction and G-plus cars. What eve happened to Aurora? Tyco use to be junk, has it improved? I have yet to see and of the Tomy or Rokar stuff, but then it's been almost 15 years since I really looked.
Tycos are quick and fairly rugged, but you have to replace the magnets and drop them down to stay on the track in the turns. Tomy bought Aurora and still manufactures track under that name. Those Aurora cars you have would probably hold their own at Ypsi Cycle (with a few modifications).
Yea, I had them out about a year ago and the sponge tires were getting hard, though the silicone ones seemed fine. I also was never too fond of the idea of holding cars to the track with magnets and prefer the ones without. I have one of two standard cars that can hold their own against the magnetic cars though.
what kind of cars don't use magnets?
Most do, in their motors. I was talking about using the magnets to hold the car to the track.
Response not possible - You must register and login before posting.
|
|
- Backtalk version 1.3.30 - Copyright 1996-2006, Jan Wolter and Steve Weiss