Used Class III ball mount, with 1-7/8" chrome ball.  2" drop or 3/4"
rise.  (Currently set up for a 2" drop.)  Rated for trailers up to 5,000
pounds, with up to 500 pounds of tongue weight.

These things seem to come in at least two different lengths; this is the
shorter kind.  If the distance from the opening on your hitch receiver
to the center of the hitch pin hole is three inches or less, this will
fit.  Class III means that the opening on your receiver should be 2" square.

The ball could be removed to install a different size, however it might
require a bit of "persuasion".  It was used on a low car that regularly
went in and out of steep driveways, so the bottom of the ball stud is
ground down a bit and the threads are damaged.

I'd like $5.

2 responses total.

2" receiver?

Yup.

Response not possible - You must register and login before posting.

- Backtalk version 1.3.30 - Copyright 1996-2006, Jan Wolter and Steve Weiss